Research on Mechanical and Control System Design Based on 3D Printing Equipment

Jiatong Yu

Abstract


Based on the development requirements of printing equipment, the system design, system processing, installation and debugging, performance testing experiments, system trial operation and system improvement of 3D printing equipment are studied in several stages, and the technical standards for the relevant machinery and control systems of the equipment are studied. Design and optimization were carried out, and the development of the equipment was completed.


Keywords


3D Printing Equipment; Mechanical Design; Control System; Control Software

Full Text:

PDF

Included Database


References


Albar A, Chougan M, Al-Kheetan M J, et al. Effective extrusion-based 3D printing system design for cementitious-based materials[J]. Results in engineering, 2020, 6: 100135.

Liu YM. Research on control system design of micro-jet forming 3D printing equipment based on STM32 [D]. Huazhong University of Science and Technology, 2019.

Sathish T, Vijayakumar MD, Ayyangar AK. Design and fabrication of industrial components using 3D printing[J]. Materials Today: Proceedings, 2018, 5(6): 14489- 14498.

Wu JJ, Huang LM, Zhao Q, Xie T. 4D Printing: History and Recent Progress[J]. Chinese Journal of Polymer Science, 2018, 36(05): 563-575.

Bharat Bhushan, Matt Caspers. An overview of additive manufacturing (3D printing) for microfabrication[J]. Microsystem Technologies,2017,23(4).




DOI: https://doi.org/10.18686/esta.v9i4.265

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Jiatong Yu

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.